ZK SEPARATION Decanter for Use in Steelworks
The decanter centrifuge developed by ZK for wastewater purification, waste slag recovery, and pickling sludge treatment in steelworks uses anti-wear protection materials. Through wastewater purification, cooling water and cleaning water can be recovered, and the impermeable residue can be used in other ways. In the dewatering of steel slag residues in steelworks, the use time of its anti-wear protection is greatly extended. Simultaneously, the equipment is equipped with an automatic control system, which can automatically adjust the differential speed according to different loads to achieve the energy-saving goal while earning the maximum dehydration degree. The use of ZK decanter centrifuges in steel mills will effectively improve economic benefits and reduce environmental pollution.
Steelwork Sludge Centrifuge Parameters
| Model | Dia (mm) | Rito | Speed (rpm) | G force | Differential (rpm) | Main Motor (kW) | Back Motor (kW) | Capacity m3/h | Weight (kg) | Dimension (L x W x H)(mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| LW250 x 1025B | 250 | 4.1 | 5000 | 3500 | 1~50 | 11 | 4 | 0.5~3 | 1250 | 2500 x 800 x 1150 |
| LW350 x 1435B | 350 | 4.1 | 4000 | 3136 | 1~35 | 22 | 5.5 | 3~10 | 2500 | 3700 x 1050 x 1200 |
| LW450 x 1845B | 450 | 4.1 | 3200 | 2580 | 1~34 | 30~37 | 7.5 | 8~15 | 4200 | 4300 x 1150 x 1450 |
| LW520 x 2150B | 520 | 4.1 | 3000 | 2620 | 1~34 | 45~55 | 15 | 15~20 | 5200 | 5100 x 1250 x 1600 |
| LW580 x 2400B | 580 | 4.1 | 2800 | 2546 | 1~36 | 75~90 | 18.5 | 20~30 | 6500 | 5520 x 1450 x 1700 |
See More Similar Fields of Application
Steelwork Sludge Decanter Application Cases
Why Choose ZK Decanter Centrifuge ?
-
Easy Operation
ZK decanter can run continuously and automatically. The control of the decanter centrifuge is completed through the touch screen of the control panel, and the one-key start and stop of the decanter can be realized through the control panel. The control panel interface is simple and easy to be understood, and operators can easily monitor the working status and understand the operating parameters.
-
Durable
All wear-prone areas of ZK centrifuges (separation liquid outlet, solids discharge output, screw conveyor and solids discharge section) are made of abrasion resistant material, and the rotating parts are made of high-strength centrifugally cast stainless steel. For the wear-resistant requirements of special industries, replaceable hard alloy wear-resistant pieces are added to the spiral blades.
-
Lubrication Ways
In order to meet the actual needs of different customers, ZK decanter centrifuge provide three different lubrication ways (grease pump grease lubrication, lubricating oil circulating lubrication and oil mist lubrication) for customers to choose. All lubrication systems can re-lubricate the rotor bearings during centrifuge operation.
-
Safety and Security
ZK decanter differential speed automatic control technology can automatically adjust the screw conveyor differential speed, to prevent overload and blockage. At the same time, ZK decanter centrifuge has vibration protection, bearing temperature protection and overload protection system. This can avoid critical operating conditions and prevent damage to centrifuge components and bearings.
