ZK Starch Centrifuge for Wheat Starch Production Process
Centrifugal separator is one of the key equipment for wheat starch production. In the starch separation process, the ZK starch centrifuge occupies only 1% of the area of the traditional sedimentation flow tank, which can save a lot of construction investment, and the whole process of starch separation and extraction is continuous, and completed in a closed system. This will greatly improve the yield and quality of starch. At the same time, our centrifuge has the characteristics of high capacity, low energy consumption and high reliability. We can also provide professional technical solutions according to your actual production line.
Wheat Starch Centrifuge Parameters
|Model||Dia (mm)||Rito||Speed (rpm)||G force||Differential (rpm)||Main Motor (kW)||Back Motor (kW)||Capacity m3/h||Weight (kg)||Dimension (L x W x H)(mm)|
|LW250 x 1025E||250||4.1||4500||2835||1~50||11||4||2~8||1250||2500 x 800 x 1150|
|LW350 x 1435E||350||4.1||3500||2435||1~35||15~22||5.5||4~15||2500||3700 x 1050 x 1200|
|LW450 x 1845E||450||4.1||3200||2580||1~34||30~37||7.5~11||10~40||4200||4300 x 1150 x 1400|
|LW520 x 2150E||520||4.1||3000||2620||1~34||55~75||11~15||15~70||5200||5100 x 1250 x 1600|
|LW580 x 2400E||580||4.1||2800||2546||1~30||75~90||15~18.5||25~80||6500||5520 x 1450 x 1700|
|LW650 x 2600E||650||4||2600||2460||1~28||90~110||22||30~90||7800||6250 x 2000 x 1550|
|LW750 x 2800E||750||3.7||2200||2033||1~28||110~160||30||40~100||11000||6500 x 2200 x 1600|
Wheat Starch Extraction Process
Why Choose ZK Decanter Centrifuge ?
ZK decanter can run continuously and automatically. The control of the decanter centrifuge is completed through the touch screen of the control panel, and the one-key start and stop of the decanter can be realized through the control panel. The control panel interface is simple and easy to be understood, and operators can easily monitor the working status and understand the operating parameters.
All wear-prone areas of ZK centrifuges (separation liquid outlet, solids discharge output, screw conveyor and solids discharge section) are made of abrasion resistant material, and the rotating parts are made of high-strength centrifugally cast stainless steel. For the wear-resistant requirements of special industries, replaceable hard alloy wear-resistant pieces are added to the spiral blades.
In order to meet the actual needs of different customers, ZK decanter centrifuge provide three different lubrication ways (grease pump grease lubrication, lubricating oil circulating lubrication and oil mist lubrication) for customers to choose. All lubrication systems can re-lubricate the rotor bearings during centrifuge operation.
Safety and Security
ZK decanter differential speed automatic control technology can automatically adjust the screw conveyor differential speed, to prevent overload and blockage. At the same time, ZK decanter centrifuge has vibration protection, bearing temperature protection and overload protection system. This can avoid critical operating conditions and prevent damage to centrifuge components and bearings.